The Traditional Interpretation
Ackling Dyke has long been identified as a Roman road extending from Old Sarum (Sorviodunum) in Wiltshire to Badbury Rings in Dorset, forming part of a wider communication route continuing towards Dorchester (Durnovaria).
This identification is firmly established in archaeological inventories, Historic Environment Records and Historic England’s scheduling descriptions. Consequently, substantial surviving banks, metalled surfaces and linear earthworks have been grouped under the collective designation of a Roman road.

This interpretation is supported by evidence. Roman occupation is well documented at Old Sarum and Dorchester, while excavations along the corridor have identified metalled surfaces and evidence of wheeled traffic. A Roman communication route between these locations is therefore entirely plausible.
The question is not whether the Romans used this corridor. The question is whether they originally constructed every substantial earthwork now attributed to their road.
These are two fundamentally different archaeological propositions.

The Problem with a Single Construction
A road is normally identified by its engineering characteristics: a prepared running surface, sufficient width for its intended traffic, appropriate foundations, and an alignment connecting identifiable destinations.
However, the surviving features collectively labelled Ackling Dyke do not consistently exhibit the same physical characteristics.
Some sections contain relatively narrow surfaces compatible with wheeled transport. Others comprise substantial raised banks, large accompanying ditches or cuttings of considerably greater dimensions. Elsewhere, the recognised alignment disappears altogether or changes direction in ways that warrant further investigation.
These variations do not automatically exclude Roman construction. Roads can change width, height and construction technique in response to local geology, terrain, drainage requirements and available materials. Centuries of erosion, agriculture and subsequent development can also remove substantial portions of an original road.
Nevertheless, these explanations must be tested against the surviving evidence rather than assumed to account for every difference.
One particularly important distinction concerns the difference between a road constructed on top of an existing earthwork and an earthwork constructed specifically to carry a road.
Both might ultimately produce a metalled surface with Roman material, but their construction histories would differ.
The presence of Roman artefacts or a Roman-period running surface establishes activity during that period. It does not necessarily establish the original date or purpose of the underlying bank, ditch or cutting.

A Landscape That May Have Been Reused
Britain’s prehistoric landscape already contained extensive earthworks, trackways, extraction sites, settlements and established communication corridors long before the Roman occupation.
It would therefore be reasonable to investigate whether Roman engineers used suitable existing infrastructure rather than assuming they created every element from previously undisturbed ground.
The possibility becomes especially relevant where the mapped route passes through substantial prehistoric monument complexes, encounters major extraction landscapes or approaches palaeochannels and former lowland drainage systems.
Such relationships raise questions about whether all surviving features were originally intended for wheeled transport.
Could some have served earlier functions connected with quarrying, material movement, drainage or waterborne transport?
Could later users have adapted sections of an existing engineered landscape into a road?
Alternatively, might the entire system be Roman, with the apparent differences adequately explained by conventional road construction, drainage and subsequent disturbance?
Each possibility requires examination against the same physical evidence.
The Central Question
This investigation therefore begins without assuming that the traditional Roman-road classification is necessarily wrong, or that the proposed prehistoric hydraulic interpretation is necessarily correct.
Instead, it asks:
Does the approximately 64-kilometre Old Sarum–Dorchester corridor preserve the remains of one Roman engineering project, or does the modern designation of Ackling Dyke combine several physically different structures, potentially constructed at different times and subsequently adapted for different purposes?

Answering that question requires more than identifying a line between two Roman settlements.
It requires comparing the surviving engineering itself: its dimensions, gradients, construction profiles, alignment changes, relationships with archaeological monuments, and connections with the surrounding landscape.
The following investigation applies these tests systematically, beginning with the methodology and then following the route geographically from Old Sarum to Dorchester.
The objective is straightforward: to establish what the physical evidence demonstrates before deciding which historical interpretation best explains it.
Continue Exploring Ackling Dyke Reconsidered
Follow the investigation as we uncover the evidence, examine the ancient landscape and challenge the traditional interpretation of Ackling Dyke.
➡️ Next Page — How We Tested It
